Rave 522UA DSP Wiring Diagram | New Valley Church Docs

Diagram for the DSP

QSC Rave 522ua Digital Signal Processor Wiring Diagram

The Rave 522ua is a rack mounted digital audio router and signal processor. Every bit of audio that we produce at New Valley passes through this box and is sent to one of many locations.

There are currently 3 inputs and 6 outputs being utilized.

Inputs and Sources

Input 1: Receives all main mix faders from the Main L output.
Input 2: Receives all main mix faders from the Main R output.
Input 5: Receives all Mix 4 output.
Input 3, 4, 6, 7, & 8 are not connected.

Outputs and Destinations

Output 1: Stage Left Subwoofer
Output 2: Stage Right Subwoofer
Output 3: Stage Left Mains
Output 5: Center Mains
Output 6: 70V Amp Channel 1, Foyer.
Output 7: Stage Right Mains

Network Connection

QSControl: Standard RJ45 Ethernet port connected to the network switch. Can be accessed using QSControl.net software on a Windows based computer only.

(Note: The RAVE is a signal processor as well as a router. It’s the first place the audio signal is pre-processed with custom EQ after it leaves the QU-32. It is also where the signal is crossed over to send the appropriate frequency ranges to the active speakers.) In other words, it isolates the low frequencies from the high frequencies and sends the appropriate signals to the sub-woofer and the high/mids.